Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by JohnJohn

  1. JohnJohn

    Nortel 2270 WLAN Switch

    I'm working on getting my old Cisco 1200s on my 2270s. Cisco is giving me beta code. I'll keep you posted.
  2. JohnJohn

    Exchange 5.5 forwarding all outbound email to relay

    www.dyndns.org offers a relay service for cheap.
  3. JohnJohn

    Disable 8bitmime in IIS 6.0 SMTP for Exch. 5.5

    How do I stop the SMTP in II 6.0 on a 2003 server from accepting 8bitmime and relaying it to my Exchange 5.5 server that can not read 8bitmime? I was able to do it with a utility on 2000 server but it does not work on 2003. Thanks, John
  4. JohnJohn

    Disable 8bitmime on 2003 sever IIS 6.0

    I have my mail relaying from a 2003 Server runnning IIS 6.0 SMTP and the mail server is 2000 with Exchange 5.5. I need to disable 8bitmime. I see how to do it on 2000 but 2003 is different. Any help?? Thanks, John
  5. JohnJohn

    Passport 8100 Duplexing

    Are you using the latest version of switch manager? This is an error I get if the switch code is newer than the manager version. If not make sure you can write to the flash. John
  6. JohnJohn

    Contivty VPN client for PDA

    I use Movian with out issues. Do you have compession enabled? John
  7. JohnJohn

    Baystack 450 Cascade Problem

    We had this same issue. Turned out to be a bad breaker in a panel to the closet and the stack was rebooting and the base was lost. Seemed to be when the base booted after the rest of the stack. John
  8. JohnJohn

    BPS2000 vs. Baystack 450 24-T

    Keep in mind that the BPS will give you QoS. Also if you stack the BPS with the 450's it gives the whole stack QoS. We are using 450's, 460's, 470's and BPS's. No problem with any of them. John
  9. JohnJohn

    BayRS with a Static Route Issue

    If the router is only using static routes how is it picking up any routes? I assume it has either a routing protocol running or bad static routes. I need more detail to help you John
  10. JohnJohn

    Reset Contivity 2500?

    Can you console in to it?
  11. JohnJohn

    pass trough a contivity 400

    Need more info. When you say pass through do you me without a tunnel being up? John
  12. JohnJohn

    Contivity Switch 1500/1510 Software Version

    As of June 2001 this product line was end of life. Nortel no longer supports it. That is way you can not use newer code. This is from Nortel. EOL of the Contivity 1510, 1520, 1530 platforms is effective immediately Support Discontinuation (SD) Date: Repair services and field support will be...
  13. JohnJohn

    Contivty VPN passthrough

    You need to allow protocol 50 and 51, not port 50. John
  14. JohnJohn

    DNS Servers not pulling via DHCP over VPN

    The DNS server addresses need to be added to the Contivity Server under IPSec. This should fix your problem. Let me know.
  15. JohnJohn

    VPN connects, but inbound internal network not accessible

    The Nortel Contivity box/client is/are preventing you from seeing local resources once you launch the client. Your company is not allowing split tunneling. This is a good thing. Allowing so is not as secure. John

Part and Inventory Search

Back
Top