Recent content by jdrake

Wonderful and EASY! It seems to be working. THANKS!

I have about 20 MS Word docs that need to be combined into 1 Word doc. This is a manual produced from a software vendor and when I provide this to my customers it looks like crap, some documents have only 1 page. I want to take all the documents and combine them into 1. MS help is junk. I need...

Sounds like you may have a bad floppy or floppy cable. Its amazing that sometimes they just DIE

The chip you see is most likely not the cpu. Every laptop I have been in has had a very recognizable Intel (or other) cpu. They are usually wired to the main board and cannot be upgraded plus your looking at risking broken cases and other problems as laptops can be very difficult to get into.

You can set the floppy to 1.44mb in CMOS and then under a different screen - Advanced maybe (depends on bios)you should see boot order options (First boot device = , second boot...etc..)The floppy should be set to first. If the bios is not detecting the CD or floppy and you did not go into the...

Options change almost everytime you change video drivers. This is very common.Every set of video card drivers is different from each other. Some offer what other do\dont. I sacrificed TV out on an STB Velocity I had a couple years ago because I wanted a better driver. There is probably nothing...

I will just re-state what butchrecon (MIS) said. Even though there are drivers for WIN95 AGP, very rarely if ever will they work. It seems that for all the pc's I have built I may have gotten an AGP card to work in win95 once but I could be wrong. More often than not you will either have the...

;-) Not to seem overly simplistic, but from your question it sounds as if the America Online executable was deleted. The easiest fix would be to reinstall AOL. If you dont want AOL. Reinstall - let it fix for AOL, what reinstalling 98 would do for 98 - then use the uninsatll option to uninstall...

I played with this and all is good now. it seems that Procomm just needed a little prodding. Thanks for your help.

Thanks Robert, I have looked very closely at the script in relation to the login portion and it looks good. Here is the interesting part: I copied the script to a disk and loaded Procomm PLus (ver 8.4) to 4 pc's copying the script from disk to the ASPECT dir. So everybody has the same exact...

Troy, I could be very wrong as I just looked into the new Abit RAID MB's a little. But from what I saw there is nothing SCSI to worry about. You simply have 4 IDE connections on the board and you can setup 2 or maore drives in a RAID configuration. I read about this at www.tomshardware.com...

My ASPECT script that I had the RECORDER build for me in Procomm Plus stops at the first prompt "ENTER YOUR FULL NAME" once the name is typed in and I press ENTER everything else inculding the transfer completes automatically. (I have installed this on 5 PC's and on 1 I dont have this...