Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by hfrantik
-
ISDN-PRI D Channel Problems
I don't know the switch type but I know the PRI is set for National. I also know the circuit works on another brand of switch I brought in to test.- hfrantik
- Post #3
- Forum: Avaya: CM/Aura (Definity)
-
ISDN-PRI D Channel Problems
D channel won't sinc up. G3 V6 single carrier cabinet TN 790 Processor, TN 777B Net Control, TN 2182B Tone/Clock TN 464GP DS1, TN 765 Processor Interface ( don't believe I really need the TN 765 ) Does this hardware look correct? I have administered, DS1 board, Signal group,Trunk group, and...- hfrantik
- Thread
- Replies: 2
- Forum: Avaya: CM/Aura (Definity)
-
IVR Implimentation with DS1 Card
You need to remove the trunks from your trunk group. Change your DS1 from isdn-pri to robbed-bit.ESF & B8ZS should have been OK. To make the trunks E&M change the group to tie. From your description you may want to assign stations to the Ti ports instead of trunks. You mentioned trying to make a...- hfrantik
- Post #2
- Forum: Avaya: CM/Aura (Definity)
