Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by FTcom

  1. FTcom

    Nortel MICB telnet problem

    try to with follow credentials: user: micb pwd: admin
  2. FTcom

    Experience Portal Refer Handling with SBC

    what SBC you use? for ASBCE check for Server Interworking -> Refer Handling, it shoud be set to yes
  3. FTcom

    Transfer SoftKey dissapear in my 1140 Phones

    you have this problem only for internal calls or for all type of calls? when put call on hold, can you hear moh?
  4. FTcom

    register phone from external network

    Hello, i have infrastructure based on cs1k, is it possible to register sip phones from external network without vpn? thank`s for help
  5. FTcom

    Fax/Analog Phone

    thanks for help, amriddle01, here is more logs: UNICODE-UTF8 08:58:16 260614044mS CMCallEvt: 0.4239.0 -1 MODEM.-1: NEW CMExtnEndpoint f4dd78ac, Name=MODEM, Extn=401, Phys Extn=401 08:58:16 260614044mS CMCallEvt: CREATE CALL:126 (f4dda1a4) 08:58:16 260614045mS CMCallEvt: 0.4240.0...
  6. FTcom

    Fax/Analog Phone

    Trunk works, T38 configured correctly as per the provider requirements. as i can understand analog phone don`t takes sip line, so call don`t exit to provider
  7. FTcom

    Fax/Analog Phone

    P.S. Sorry for spoiler
  8. FTcom

    OneX Mobile Iphone doesnt work/Android does

    if you want to have acces from external than something that you can resolve from external :) try to take a look on iphone logs, i had a similar problem, in my case iphone cold not resolve IPO FQDN
  9. FTcom

    Fax/Analog Phone

    Hello Guys I have IPO 500 v2 R9.0 build 829 with ext card. All calls goes through SIP Line (line 17), in SIP Line->Voip Re-invite is checked and Fax trasmission selected as T38. problem is that i can`t receive or send fax. I`ve tryed to connect analog phone. When i try to make a call (external)...
  10. FTcom

    one-X Portal problems

    hello guys, thanks everyone for help. problem with iphone connecting resolved, it was enough to change fqdn existing on ipo fqdn to enother
  11. FTcom

    one-X Portal problems

    few one more question to have acces from external i have to enable NAT on IPO? i need STUN? on router will be enough to forward ports: 5060 -> TCP&UDP to IP Office 5061 -> TCP&UDP to IP Office 5222 -> TCP to one-X Portal 8444 -> TCP to one-X Portal 5269 -> TCP to one-X Portal or i need to...
  12. FTcom

    one-X Portal problems

    Now the things are more strange, app on android in VoIP mode works, not perfectly but works But if i use iphone in VoIP mode, the led turns orange and I am unable to make any calls. On the iphone app when pushing the orange led, message error is : "App.Registration.alert.Message
  13. FTcom

    one-X Portal problems

    no errors. it`s just connect deskphones even if user make a call from browser/CallAssistent. The same thing when i answer a call (if i answer using browser caller will be connected with deskphone).
  14. FTcom

    one-X Portal problems

    ipotech808, tlpeter thanks for your responds right now i can make a call using a cell phone (problem was with port forwarding and dns more details here http://www.tek-tips.com/viewthread.cfm?qid=1719664) but i still can't make a call using web browser or Avaya Call Assistent
  15. FTcom

    one-X Portal problems

    Problem with voicemessages resolved. i had to change in one-X Portal admin page Configuration->Providers->Default-VMPro-Provider IP Address from default to my server IP address. Someone can explain why it don`t works with standart settings?
See more

Part and Inventory Search

Back
Top