Recent content by FaisalHenry

hi dan, you will reap the most benefit if you are working with other developer, with Vss you could build a form (or object or whatever) while your co developer work on other part of the project, and at the end of the day, you could combine them and see the result hope this help

hi there, i want to create somekind of a peripheral scanner that will automatically scan the pc and take notes of all peripherals attached (e.g network card), any suggestion on doing that ?

hi every1, i want to print a windows html help file, but i do not like the lay out of it, it is not printer-friendly if i may say so. is there a converter that for example, convert html help to word document or something like that ?, what i want is quite simple though, i would like to...

Whoops sorry, not enough data eh :) i want to configure the modem so it could make a call back to the phone number that was dialing it, you know so i could increase the security a bit.

Actually the hex 2102 put you out of the loop i think, so it wont go into rommon,the router will go into rommon if you press CTRL+BREAK when it is initializing fh CCNA

how do i enable call back on a cisco router 2620 ?, i have one at office

in the cisco Access Server configuration, what is the purpose of the method list in it ? aaa authentication ppp pppaccess group tacacs+ i think the command would translate into: if someone is using ppp line, authenticate whether the user is in the "pppaccess" list in the tacacs+...

Hey guys, can cisco EasyACS software handles two Access server (Routers) at a time?, i can't find the menu to add another access server, there's only "EDIT" button

oh one more thing, i am a bit confused, i have added the command Router(config-if)#no shutdown to the Group-Async 1 (the modem group), but when i checked them by using show interface async 33 (modem port 0), the status is async 33 is down, line protocol is down , should i bring them up one...

sure mike, this is the code i use to configure modem group i think you can tell that i am using dhcp, if i use an ip pool i just add the line ip local pool default 172.29.201.2 172.29.201.18, right? interface Group-Async 1 group-range 0 15 encapsulation ppp async mode interactive ppp...

i am in charge of configuring cisco 2600 router equipped with 16 port analog modem module, i read that there are 2 ways to configure the module, one-by-one or by using group if i use the group, i would have to enter the command int group-async 1 ip unnumbered fastethernet 0/0 now, i think this...

i c, well then, suppose i have planted a server program inside someone's computer that will open port 6500, could i ftp through that port?

hello guys, i have a hypothetical question here, we know that some security product usually protect or shut down well known ports such as FTP, telnet etc, but, suppose i was a hacker, and ran a port scanner, and found a port, let say 6500 was open, then what? can i use that port for telnetting...

have you try using the report designer?

hello guys, i have a small application that reads a .DBF table, extract some columns, and save them to a .txt file, for an application like this, i think it is a waste to have 5 diskettes to install it so i'm thinking to write my own dbase driver for it, any idea how to do it?. what is the file...