Recent content by edmtz75

The WQE1 model can't be updated with the 4.5 distributed version upgrade, or the drivers within, that is the same. Do anyone, knows a workaround to make this applicance over XP support drivers for this model (WANic 650 for E1). ___________________________ _________________________________ G M

First you need to know that messenger uses html to transfer data and the ip changes because it has many adresses to enter to logginet.passport.com, so you have to create a filter profile that search the DNS query to logginet.passport.net and destiny UDP port to 53 ( DNS), a data pattern to look...

RTP Protocol. I can see Netasyst sees this protocolo but ain't decode I call technical support and they told me that will be fixed in netasyst 1.5 in the 2Q 2005. Thanks anyway

I have a problem with the Sniffer when I install the drivers for proxim, agereorinoco gold 802.11b my lap hangs.

Does anybody have a problem with the decodes for a Netasyst WLX Voice Option decodes, I installed a Netasyst and enable the WLX and voice options, but in the decode i can't see the decode, the same packet in Sniffer Pro is decoded without any problem does anybody see this in another Netasyst...

Try 4.2 SP3 console in XP regards

I reset the values in my bios for this equipment, and when I restore the system with the Restore CD the device could not be started. Do somebody knows if the card need some special configuration in the bios. Regards

Hi, does any knows If I could see an ADSL link with the sniffer pro?. Regards

There are some tips to fins a DoS. If you find a lot of ICMP paquets, and if you llok the decode and find that the packet is fragmented, there is a Ping of dead, some attacks ( smurf, poD ) use ICMP packets, so you will find an excesive amount of packets of this tipe directed to a one or more...

Hi, it's an Avaya P882 release Boot v5.00.1 and APP release v5.04.2 The command is set port mirror Fabric_mode2 source-port 3/1 mirror-port 5/3 channel 1 direction both sampling always Thanks.

Does somebody have a problem when have tried to make a span port in a avaya switch?, I seems that avaya switches iddle when they have configured a port in mirror.

No, I wasn't clear, there is When I have a point - multipoint E1 frame relay link, I can see IP traffic when I select the X timeslots of the 31 slots in a E1 link, e.g. I use timeslots 2,3,4, and 5 for a 256 kbps link to a branch in the south and timeslots 6 and 7 to a branch on the north with...

Is it possible to capture all trafic without select timeslots for individual points in a multipoint frame relay link and leter see each individual point?, or I only could have the trafic if I select the timeslots corresponding to each point?. Regards

It is fixed with DSS SP3 and PRO 4.75 SP2

humm, I'm using the 4.2 SP2 and 4.75 SP1