Recent content by DFM

Hi....Can you tell me if it's possible for Definity users to dial 5 digits internally but have the call route out to the PSTN network for termination? In otherwords, user dials 41680 but the call actually routes to the network out pulsing 781-784 1680? Any help is appreciated.

Hi folks, I'm hoping someone here knows the answer to this question, Is it possible to have a "notification email" only on the receipt of a new voice mail message as opposed to sending the actual voicemail to the email address?

time data Here is a trace of a 5 digit station (50699) calling another 5 digit station (20000) across a DCS TIE Trunk. Why is the call presenting 10 digits?...can anyone help? These are 5 digit to 5 digit 10:43:57 tone-receiver 11B0001 cid 0x196f 10:43:57 active station...

Thanks Folks, you have helped me out tremendously

OK Folks, Here is my problem. I have integrated Cisco to my G3r and am conducting tests. Here are the specifics Extension 20000 (5 digit dial plan) has a UNI entry to AAR digits 234. Digits 234 steer calls to RP 400 with the only trunk group being Trk Grp 58 (below). Here is a screen shot...

Thanks for your reply. I'm not necesarily interested nor do I need to remove the ARS/AAR translations at this point. I need to remove the Sig Grp and the associated translations related to the trunk group as they are down at layer one due to defit of hardware and they are causing alarms in the...

Can one of you good folks help me understand the process for removing a Trunk Group from a Definity S8700? Each one has a signaling group. Is the process below correct? 1. Remove the 24th channel from the signaling grp 2. Remove the signaling group 3. remove the members from the trunk group 4...

Is there a way I can tell if my system ie equipped with RAID via customer admin access?

Can any of you folks tell me what type of disk redundancy is supported on the MAP 40? Thanks

Are you using ISDN for inbound? How many digits is the CO sending you?

Hi Folks, I'm a telecom person who is anewbie to storage management. Our storage people suggested using Tivoli for backing up some Win2K servers used for telecom apps. Everything is OK except we would like e-mail notification upon a succesful, or non sucessful backup. The people...

The company I work for has just piloted CCM for a couple of weeks, being a large enterprise, I can tell you that it will be years before we collectively decide to implement a voice system by a vendor...who knows nothing about voice. Their feature set is lacking in a big way, basic features such...

Depends on which digit you assign the FAC in the dialplan. I access AAR with an 8 and ARS with a 9 Hope that helps

Thanks for the info

Hi Folks, Hoping someone out there can point me in the direction of a resource containing sample RFP's for a PBX. I would be greatly appreciative... :)