Recent content by daffymd

The Splicecom system will definitely do the job. We maintain a Splicecom system at a business centre with ISDN30 and SIP trunks connected to it. There are a large number of tenants and also virtual tenants. Incoming calls are routed to a centralised reception group and a web page is pushed...

This may be of some use http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuration_example09186a00801d8113.shtml

Have been running two IP phones across a pair of Sonicwall TZ170's for ages without any issues. Have also used a pair of PC's running IPCop to establish a site-to-site VPN which we run voice over without any problems.

Hello guys. Thanks for your responses. The PBX is from a UK company called Splicecom. I was wanting to ensure that anything marked with DSCP was put into a priority queue rather than remapping the DSCP to 46. My problem is that I have studied the output from the command sh mls qos maps and...

Might be worth reseating any installed memory modules. May have come loose in transit (have had this problem a couple of times).

Router should see card automatically. Have you tried card in a different slot? If that doesn't work could be faulty card.

I am trying to put together a config for a 2960 switch (running 12.2(25)SEE3 C2960-LANBASE-M) that will give priority to voice packets which are already marked with DSCP 40 by the VoIP phone systems. I have successfully used Cisco 2950 switches to do this in the past so I want to ensure that my...

Hi Sorpio Manager and bin files on way to you. MattKnight - The reason that we used 2.3(25) on the Argent Branch was because it introduced the Anti-tromboning feature that had been promised to one of our customers!

http://www.cscomms.biz/downloads/

There was a version 2.3(25) for Argent Branch which is equivalent to very early IP Office. It had lots of VoIP stuff in it. I also have a version 2.3(26) which has a few bug fixes in it. Let me know if you want copy of bin files and Manager to go with it.

Could it be something to do with Firewall settings on PCs? Might explain why you see request leaving PC but no response getting back.

Should be fine. You can even get splitters ready made (not trying to sell you anything, just showing that it is possible!) http://www.comms-express.com/pd1885295064.htm?categoryId=153

You would need to create a VPN from the Branch Office 1841 to the HQ Watchguard. Not done it myself but there are some examples of Watchguard to Cisco PIX here to at least get you heading in the right direction. http://www.watchguard.com/support/interop/interopVPN/interopvpn.asp

I think that the conference chip was only in the BT Fusion version of the Argent Office.

Late night but nice and quiet with no phones ringing around me!