Recent content by chooseU

Thanks, everyone, for your help. Here's what ended up working: Checked CRC box. Un-checked CSU box. All other settings the same as above. D-channel came right up after these changes.

Yes--we didn't get a signal on the straight-through. Will collect the traps and post. Delayed the number port, so we could get to the bottom of this.

thread940-1571028 Looking for help from those that have implemented an XO IP Flex PRI with an IP406V2. Our customer's IP406V2 is currently connected to a Verizon PRI and works fine. However, each time we try to switch to their new XO IP Flex service, the D channel will not stay up. Have...

It's the Play Config Menu.

I haven't been able to try this in person, but the customer says the phone system "lights up like a Christmas tree" when he plugs in the T1 cable with the line set as KWING suggests. However, he installed a dual T1/PRI card in a 406V2 which already contained a dual T1/PRI card. Any thoughts?

No, it's an 8-port.

Forgot to mention: All inbound voice traffic is coming into a dual PRI card (they have 2 PRIs). The customer added a second dual PRI card to the system, not knowing that only one of the ports would be supported on a 406V2. One of the T1 ports on the new card is connected directly to the...

We are attempting to set up DID faxing between the IP Office (406V2 - 3.1.65) and a RightFAX server with a Brooktrout TR1034 installed. The Brooktrout board is showing a green light, but we can't pass any traffic either way. I've set up short codes based on other information found on this list...