Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by CDank3
-
T1 line to connect to secure site
I got it to work dk87. I just put the 172.12.x.x address for the WAN and used the 192.168.0.100 (router) for the default gateway and it worked. I connected the T1 which was a crossover cable into the WAN port of the DLink router. Thanks for the ideas and help.- CDank3
- Post #6
- Forum: Microsoft: Windows servers
-
T1 line to connect to secure site
I am going to put in a D-Link router and set its ip at 192.168.0.100. So that will be my default gateway. So I should be able to plug the T1 line into it how should I set the Wan up inside the router?- CDank3
- Post #4
- Forum: Microsoft: Windows servers
-
T1 line to connect to secure site
I have a T1 line coming into a switch. The line is to reach a secure site only. My win2k server has 2 nic cards but only one that I am using for my network. I use the 192.168.0.xx for my dhcp and I use the server's address as the dns. Which is 192.168.0.1. So if the ip address to the T1...- CDank3
- Thread
- Replies: 5
- Forum: Microsoft: Windows servers
-
Accessing a Secure site through the server
I am running Windows 2000 server. I have an internal network on a domain. There are two nic cards in the server one is for the internal network and the other for the secure site. My internal network runs off the 192.168.0.xx addresses. The other nic runs from the secure address 172.17.42.65...- CDank3
- Thread
- Replies: 0
- Forum: Microsoft: Windows servers
