Recent content by briancad

Trying to this working now. Please send a copy to briancad at ix . netcom . com Thanks

IP Guru, I would like to see your sample config for this. When will your FTP link be up? Thanks Brian

What about the simple old fashioned "Cover" feature. Under each of the 4 users put the shared extension in the cover tab. The display on the shared extension will show who the call is for and the call will go to the users voice mail if not answered. Don't need voice mail pro for this to work.

Are these the only two commands of this sort? If not, does anyone have a list?

If you already have an overhead paging system you can add a third party device that provides a "tone" over the speakers when it is activated by ring voltage. Connect this device to an analog extension port. Put the extension port into a Hunt Group by itself. Assign this new hunt group as the...

I could definitely use your reports. Thanks in advance. briancad at ix dot netcom dot com

Just found out that the clicking is occuring on conference calls also.

Have a 406 2.0 with VMPro. When a user activates call recording whether by programmed button or through Phone Manager, a loud clicking and some static comes onto the line. Both parties can hear it, the noise is recorded in the message and it's loud enough that you cannot continue the...

I've had customers ask for this as well. What they really wanted was to be able to put a call on hold, see it flashing and be able to pick it up from any other set. We just put 3 or 4 Call Park buttons on each set and numbered them the same on each phone. (ie. Call Park 1 on button 6, Call...

There is a default short code for logging out of a hunt group. Could users be dialing that by accident?