Recent content by badip

In the right hands, with the right people it's a great system. In the wrong hands; a disaster spoiling the name...

but beware..... one never knows the version one runs :)

Check VM Pro Console for any actions setup on the users in question. It sounds like someone has routed the users voicemail action to 'no where' for that user.

Blind transfer to a dummy mailbox.....

Find a new VM server, install VM Pro and test...

Untick 'Show Account Code' under system>telephony. regs Badip

That will be why it doesn't work. Avaya have them formatted in a unique way and this is copyrighted, you'll need to speak with your supplier to purchase an additional card. Or you could just install VM Lite and save yourself a load of hastle. There is no known way to format them and even if I...

Is the card you are using an official Avaya memory card or just a standard compact flash card? The Avaya memory cards are specifically formatted to prevent any compact flash card being used.

SC ? no .W line 0 feat dial Then do as Jestrock suggests an set this as a user restriction and apply to neccessary users.

HI, If you do a quick search on the forum regarding this you'll find that you can reserve a Line appearance for transfering etc. See thread940-1171931 for full details. Regs

Hi, We have had a similar problem though ours was running 406 V2 with a V1 pots 30 and Interquartz 9335. CLI is displayed on the system ports but not on the expansion module ports. I spoke to our distibutor who had a number of cases outstanding with Avaya, though in all his cases a reboot of...

Unfortunatley I would have to suggest that VMPro is installed on a dedicated machine rather than an existing server.

Unfortunatley modules should not be located remoteley and should ALWAYS be connected via the supplied shielded cat5 cable. This is to conform to certain standards. I suspect JeSTeROCK is reffering to what I would call a shunt. Basically running a 20/50/100 pair comms cable from 1 cab to...

Most definatley not normal behaviour. Have you checked the usual, i.e all usernames, huntgroup names and extension numbers are unique?? Are you 100% sure that you didn't manage the wrong box or send the config to the wrong box?? You can probably manage both boxes from either end so this could...

Hi, Sounds to me like you have invalid licenses, VM Pro will run for 2 hours without a license after that you will hear dead air. If you reboot the server or restart the service you'll get another 2hrs. Check your licenses are valid and do the neccessary. If you're having license problems I'd...