Recent content by 2know

vschumpy, Thank you for your help! AS2000 was patched up to SP5. I could ping "names" in both directions but still could not auto discover or backup by name resolution. The fix was in your link... http://supportconnect.ca.com/sc/redir.jsp?reqPage=search&searchID=TEC341621 After using...

Thanks for the link. However this is the client version that I am already using. Two things I notice that I'm not sure make a differance are... 1.) When I create/modify the backup job, I can see the local drive on the client workstation via the static IP address & select whatever I want to...

I am running Arcserve 7 on a Netware 6 server and was successful at backing up a W2K PC with the Arcserve Windows 2000/NT agent. I recently replaced that W2K PC with an XP Pro SP2 PC. I quickly realized that the XP firewall may give me some trouble so I did some research and found the XP & .NET...

Thank you to everyone who tried to help. Although your repleys did not correct my problem I did learn many things. Below is a link to the fix of my problem. http://support.novell.com/cgi-bin/search/searchtid.cgi?/10080438.htm In short... Apply the registry key...

I am running Windows XP Pro and am logging into a Netware Server. Once XP loads, it is very slow to display the drives in Windows Explorer. Eventually the drives are displayed after 30 seconds or so. If you go out and come back into it, everything displays as normal. Window 2000 machines on the...

I know the .doc needs to be opened in Word but while I am trying to save the WP file as a Word file, the WP conversion process has to take place. During that process is when I get the error "File appears to be corrupted". Sometimes the file is actually saved as a Word document but I am then left...

I'm having a problem converting WP9 files to MS Word 97/2000 format and problems publishing to PDF too. The file size of the converted file (.doc or .pdf) are only 1 or 2K. Sometimes when I "Save As" to a .doc file, WP converts the file and then displays "File appears to be corrupted".

This sounds just like a problem I am having. Did you ever solve this problem?

I have a couple of XP machines using Novell client 4.83 SP2 to log into a Netware 6.0 (SP4) server. While working in Windows Explorer on a mapped drive every once and a while we get an "invalid drive" error when exploring that drive letter. At that point I can still access other drive letters...

W2kuser, Did you ever figure out this problem??? I have one W2K machine with this same problem. The user is not technical and does not add or remove programs. He puts the icons that he uses the most on the left side of the desktop and the ones he rarely uses on the right side of the...

When our server was set up, Groupwise 6.0 was installed on the 15GB SYS volume along with Arcserve 7. What I quickly learned after coming on board was that the SYS volume was running out of drive space. I moved Arcserve to it's own volume and that worked great for a while but without proper...

Marvin, I can't thank you enough for all your help! Your last comment of your last reply was the tip I needed. - "It may help to know what your logical drive structure is exactly..." From the console I went back into CPQONLIN and realized this whole problem was an over-site on my...

Below is the fix from CA email Tech Support. I did this about a week ago and all is well... so far. Check the Btrieve.nlm and for the Version 7.x or above Locate the Bti.cfg Under sys:system and verify the settings with the Doc at the URL http://support.ca.com/techbases/as61/10135.html...

Thanks for taking the time to reply. I read a Novell TID that said the same thing so I tried to create a NSS partition but it would/could not see the free space to allow me to select it. I thought maybe I already had to many partitions so I deleted the 4097MB Dh partition (it only holds my...

Below is how my Compaq Array Adapter is broken up. After recently adding another disk to the array and expanding it with CPQONLIN I now have free space available but I can't assign it to any pool. Ultimately I would like to create a new Pool with two volumes within that Pool. How do I assign...