4.0.35 Delta server

testbench · Feb 2, 2005

Hi All,

I have the engineers tool kit for 2.1(15) within which there is documentation for Delta server (SMDR) for delta Server 4.0(29).

Does anybody know where I can find documentation for delta server 4.0(35). I would like to know which output fields represent which data.

I hope you guys can help

Joe

intrigrant · Feb 2, 2005

As far as i know there are no changes in the output different as reported in the documentation.
If there are changes i would immediatly have some resellers jumping on me because their collecting software does not report anymore.

testbench · Feb 3, 2005

intrigrant-Thanks for the reply.

We were running DS 4.0(29) on IPO V2.1(24). In the Dialled_number and Called_number fields the output was as follows: 0845xxxxxxx; (the x denote digits i have replaced)

the character that caused concern was the ';'.

We are going to upgrade the unit to v.2.1(27) and DS to 4.0(35) since when we tested this two versions together every thing seem fine.

Many thanks

Joe

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

4.0.35 Delta server

testbench

Vendor

intrigrant

Systems Engineer

testbench

Vendor

Similar threads

Part and Inventory Search

Sponsor