×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

How to use a Cisco 1760V-SRST as a remote office voice gateway

How to use a Cisco 1760V-SRST as a remote office voice gateway

How to use a Cisco 1760V-SRST as a remote office voice gateway

(OP)
I need help to set up a Cisco 1760V-SRST router as a remote office voice gateway. The 1760V will have 4 FXO ports (for local PSTN access). I want to have calls to the remote site office users be answered by the 1760V, sent accross a P-T-P DS-1 to a BCM at the main site, and then have the call routed back accross the P-T-P DS-1 to the user's Nortel IP phone. The BCM at the main site will have it's own local PSTN access.

RE: How to use a Cisco 1760V-SRST as a remote office voice gateway

You'll need a similar router/fxs setup at the BCM site to break the in bound CO lines down to analog lines.  Once those analog lines are terminated into the BCM on a CO trunk module, it's just a matter of assigning the lines to ring on the i200x phones.
   You'll want to make sure that you configure LLQ or some other QOS mechanism on the WAN link to ensure that your IP phones work well at all times on the backhaul.
   SIP trunks may be an option, but I'm not sure if the BCM will support SIP trunks from a non-Nortel gateway.
   Good luck.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close