×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

ISDN for CTI from G3R

ISDN for CTI from G3R

ISDN for CTI from G3R

(OP)
I have set up an ISDN line from my G3R to a CTI box and it does not seem to work. Does anyone out there have any experience with this?
Here is how I have it set up.
       Bit Rate: 1.544                    
Line Coding: b8zs
Line Compensation: 1             
Framing Mode: esf
Signaling Mode: isdn-pri
Connect: network
TN-C7 Long Timers? n              
Country Protocol: 1
Interworking Message: PROGress          
Protocol Version: a
Interface Companding: mulaw                   
CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz
Slip Detection? n       
Near-end CSU Type: integrated
Echo Cancellation? n
ESF DATA LINK OPTIONS
Network Management Protocol: tabs
Send ANSI-T1.403 One-Second Performance Reports? n
Far-end CSU Address: b

 INTEGRATED CSU OPTIONS
Transmit LBO: 0db
Receive ALBO: 26db
Upon DTE LOS: loopback
CPE LOOPBACK JACK OPTIONS
Supply CPE Loopback Jack Power? n   

The Trunk Group set up is like this:

Group Type: isdn          
CDR Reports: n
Group Name: 401 CTI DEV ISDN            
COR: 1        
TN: 1        
TAC: 234
Direction: two-way        
Outgoing Display? n         
Carrier Medium: PRI/BRI
Dial Access? n                
Busy Threshold: 255       
Night Service:
Queue Length: 0
Service Type: tie                   
Auth Code? n            
TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6     
Codeset to Send National IEs: 6
Max Message Size to Send: 260
Supplementary Service Protocol: a    
Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: cyclical
Digital Loss Group: 13
Calling Number - Delete:     Insert:                 Numbering Format:
Bit Rate: 1200         
Synchronization: async    
Duplex: full
Disconnect Supervision - In? y  Out? n
Answer Supervision Timeout: 0  
TRUNK FEATURES
ACA Assignment? n            
Measured: none      
Wideband Support? n
Internal Alert? n        
Maintenance Tests? y
Data Restriction? n     
NCA-TSC Trunk Member:
Send Name: n      
Send Calling Number: n
Used for DCS? n
Suppress # Outpulsing? n
Outgoing Channel ID Encoding: preferred     UUI IE Treatment: service-provider

Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Send Connected Number:             
Send UUI IE? y
Send UCID? n
Send Codeset 6/7 LAI IE? y                         
Ds1 Echo Cancellation? n
US NI Delayed Calling Name Update? n
SBS? n  Network (Japan) Needs Connect Before Disconnect?

...so, from this info can anyone tell me what I am doing wrong?

Thanks.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close