Mitel SX200 - Printer 1

BestWestern · Dec 21, 2004

We have a Mitel SX200 System with Superconsole 1000.
How and where do I connect a printer to record Wakeup calls Set and NOT Answered.
I have Laser printer - or do I need a dotmatrix.

Thanks in advance - for any help.
Best Western - Motel

BestWestern · Dec 27, 2004

please, any help available !

jsaad · Dec 27, 2004

dot matrix printer connected to the printer port. you'll have to tell us what model SX200 you have. then you have to print your maintenance logs.

best bet is to get in touch with a technician.

BestWestern · Dec 28, 2004

The SX100 we have is SX100 ML with LITEWARE 17
does this help?

jsaad · Dec 28, 2004

probably an SX200 ML. you'll need to print your maintenance logs. a good Mitel tech could do this for you. quite complex.

http://www.tgscorp.com

MitelTech · Dec 28, 2004

You need a serial printer, your laser could be, but I doubt it. Once you have that you connect it to the printer port, or have a dataset installed & programmed. Once that is set up you direct the logs to that printer. Simple really, if you're a tech. If you're not, well, could be difficult.
Note: I think it prints all set/attempted/answered/expired wakeups, not just the 2 you wanted (maybe a 200 tech can clarify that, I only work on 2000/3300's).

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Mitel SX200 - Printer 1

BestWestern

Technical User

BestWestern

Technical User

jsaad

IS-IT--Management

BestWestern

Technical User

jsaad

IS-IT--Management

MitelTech

Technical User

Similar threads

Part and Inventory Search

Sponsor