×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
• Talk With Other Members
• Be Notified Of Responses
• Keyword Search
Favorite Forums
• Automated Signatures
• Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

#### Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

# Vector Issue - Vector processing ends after route to command

## Vector Issue - Vector processing ends after route to command

(OP)
I've recently taken over telecomm at my company, and am trying my hand at vectoring.  Can someone tell me why the following vector will only route to the 2111 extension (primary attendant) where it just rings continuously? It won't play announcement 6815 after 10 seconds?  Thanks for your help.

Telecom Neophyte

01)    Goto step 04 if time of day is Mon 08:00 to Fri 17:00
02)    Goto step 06 if time of day is All 17:00 to All 8:00
03)    Goto step 06 if time of day is Sat 8:00 to Sun 17:00
04)    Route to number 2111 with cov n if unconditionally
05)    Wait time 10 seconds hearing ringback
06)    Collect 1 digits after announcement 6815
07)    Goto vector 104 if digits = 1
08)    Goto step 09 if digits = 2
09)    Route to 3620 with cov n if unconditionally
10)    Wait time 12 seconds hearing ringback
11)    Route to 2080 with cov n if unconditionally

### RE: Vector Issue - Vector processing ends after route to command

Metthew,
The above vector would not work the way you want, The "Route to" step takes the call out of the vecotor & the call would not follow the balance steps written in the vector after route to step. There is another ways to do this like:

1. Create a new vector with the balance steps for playing "ann. & collect digit"

2. Add a new VDN & assign this new vector to this new VDN.

3. Define a cov path for extn. 2111 & at the first cov. point enter this new VDN # . You need to check whther you want only the outside calls to get the vector treatment & need to select the conditions in cov path accordingly( no answer/ busy/ active/ inside/ outside etc.)

4. Modify the current vector to set cov "y" for 2111.

This would give you the desired call flow.

Hope this would help.

### RE: Vector Issue - Vector processing ends after route to command

Still you should change step 1-3 as well...

What I read is that you want to route to your attendant during business days & hours and otherwise route to the announcement.

First three lines should be like:

01 Goto step 06 if time of day is fri 17:00 to mon 08:00
02 Goto step 06 if time of day is all 17:00 to all 08:00
03 Goto step 04 if time of day is all 08:00 to all 17:00

The above solution would work if only the extension mentioned wouldn't have been an attendant. But as it is an attendant it won't be able to assign a coverpath to the console.

Rgds.

M.

#### Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

#### Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Close Box

# Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

• Talk To Other Members
• Notification Of Responses To Questions
• Favorite Forums One Click Access
• Keyword Search Of All Posts, And More...

Register now while it's still free!