cannot start portmap service : port UDP 111 in use
cannot start portmap service : port UDP 111 in use
(OP)
on a W2K SP4 server i installed NFSServer (and dependancies) from the command line install. I then cannot start the NFS Server because of the error:
the portmap service could not start as it could not register on port UDP 111. please ensure that no other program has registered on port UDP 111.
I have checked the MS site and i have none of the applications running which can normally register this port.
When i run a rpcinfo -b command on the port number i get a response from a local Sun Server. Does this mean the Sun box has locked on to this port? Any ideas as to which Sun apps could be causing this ?
Any help much appreciated - i am a bit stuck now.
Thanks.
the portmap service could not start as it could not register on port UDP 111. please ensure that no other program has registered on port UDP 111.
I have checked the MS site and i have none of the applications running which can normally register this port.
When i run a rpcinfo -b command on the port number i get a response from a local Sun Server. Does this mean the Sun box has locked on to this port? Any ideas as to which Sun apps could be causing this ?
Any help much appreciated - i am a bit stuck now.
Thanks.
RE: cannot start portmap service : port UDP 111 in use
RE: cannot start portmap service : port UDP 111 in use
I think you can force arcserve to use different port during startup. Try search on windows website. I had the same problem and solved it. I forgot where I found the solution.
dbase77
RE: cannot start portmap service : port UDP 111 in use