×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Siemens HiPath 3000 + optipoint 500 issue

Siemens HiPath 3000 + optipoint 500 issue

Siemens HiPath 3000 + optipoint 500 issue

(OP)
A hiPath was just installed in our Austin office. Unfortunately, I am in Dallas and am administrator remotely. I have an extension that seems to be programmed just fine but when called it covers to the receptionist.

Here is the info on the switch under settings\set up station

Call #5062
DID 5062
Name M. Thomas
Param ...
Inactive seems to be active because there is no *
Type optipoint 500 standard
Access SLMO24 6 - 21 Master

These are the same settings as other users. Why is the user not able to use the phone? Is it switch related? I'm an Avaya guy so this is new to me. Any help would be appreciated.

RE: Siemens HiPath 3000 + optipoint 500 issue

First thing you should try is to ask someone to press #0 on the phone this will reset alle activated functions on the phone like forwarding ect.
If this doesn't work the problem will most likely be found in the system programming under settings -> incomming calls.
If you work with the latest manager-e tool go to the tab call forwarding.
Lookup the phone in the bottom list. Here you see to which routing number in the upper list it is pointing. Then lookup this list number in the upper list and you will probably will find in this list in the first colum the number of the reception.
You could do two things:
1. delete the reception number in this list (NOT Recommended) because some other phones will stop function the right way.
2. Change the number in the bottom list to a number which refers to a list that says only *

I hope this is a bit understandeble because to make the changes  is a lot easier than explain it

Good luck

RE: Siemens HiPath 3000 + optipoint 500 issue

(OP)
Thanks Silver!!!

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close