×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

KX-TD816 AND KX-TVP50 NOT KX-TVS50

KX-TD816 AND KX-TVP50 NOT KX-TVS50

KX-TD816 AND KX-TVP50 NOT KX-TVS50

(OP)
I've installed and programmed (basic) the KX-TD816 but I cannot get the KX-TVP50 to work with the KSU.  I've reset system settings on the voicemail and returned the DIP Switches back to the Normal Settings but the Power Supply Light is always flashing.  Can anyone advice, it would be much appreciated.  Also, if anyone knows where I can find an installation manual for the KX-TVP50 it would surely help.  I have port 1 and port 2 on the KX-TVP50 connected to EXT 7 & 8 respectively but when I enter Intercom 165 the display shows INVALID.

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

the tvp only needs one port to work sounds like
you don't have dpits!a flashing light means no integration
have you told phone sytem that you have voicemail
on jack 8 if not change programing for vm integration
for one port only.you must have laptop setup while
pwr up and do quick install for kx-td from tvp menu.

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

(OP)
cwc3, thanks for the info.  if I connect port 1 on the voicemail to jack 7 on the phone switch and enter the program mode (Program **1234), how do I tell the phone system that theres vm attached on jack 7, also, do I need special software to program the vm from a laptop or can I program mailboxes from a telepone.

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

what kind of phone do you have connected to programing
extension can walk you thru! no just hyperterminal
part of windows and null modem cable.

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

(OP)
thanks again, I have a KX-T7230 set, let me know If you need a telephone # (toll free)or e-mail address to walk me through this programming.

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

program *# 1234 (key in)117 (press speaker phone)
(key in) 07  (press) auto/store button

if you are in UK you can try 0870-3404201 rings into states GMT-5

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

(OP)
I was able to communicate with the vm through my laptop and it kept coming up with APT I/F Connection Is Not Established.  I know I have to tell the telephone switch that theres vm connected to it but I haven't had much luck.  I have a manual with instructions to integrate the KX-TA series PBX with the vm but not a KX-TD series PBX.  From my understanding, I connect a 4-conductor cable from port 1 of the VPS to EXT 7 of the PBX.  I then have to connect an APT to EXT 1 and turn the PBX on.  Is an APT any single line telephone with a display to configure the PBX or is it a special Panasonic telephone ?  When I try Program mode from the KXT-7230 set (Program **1234) I have very limited programming, if I enter Program *# the system seems to look for a 4 digit combination of some sort.  This PBX was originally configured as a 4x8 and an 8 port EXT Module has been added but not plugged in if this helps any.  I"m in the understanding that from the APT (Ext1) that I tell the vm 1 APT port is for the KX-TVP50 to enable APT integration on extension 07. Can you offer anymore advice ?  













RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

you will not be able to
do quick setup on voicemail unless you do what i
described befor your post.a toll free numberfor me
is all i need to help you!

RE: KX-TD816 AND KX-TVP50 NOT KX-TVS50

(OP)
1-866-283-6893 Ontario, Canada

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close