Customer Request
Customer Request
(OP)
I'm new to avaya and i'm lost with this request.
The customer has 403 with pri 2* isdn 30 and the software level is 2.0
the customer wants line appearance to be set against individual DSS Keys on a 2050 handset is this possible to achieve.
The customer has 403 with pri 2* isdn 30 and the software level is 2.0
the customer wants line appearance to be set against individual DSS Keys on a 2050 handset is this possible to achieve.
RE: Customer Request
However Programming a numer of park bays under the DSS keys can give a reasonable compromise.
when ther user presses the key the caller is parked & the button will flash red on all users with this park bay programmed & can pick up the call if required.
RE: Customer Request
Also how can i Programming a numer of park bays under the DSS keys. I know it's done under digital telephnoy but what would you type
*37*N# is to park a call
RE: Customer Request
RE: Customer Request
RE: Customer Request
30 customers or so and there the worst
RE: Customer Request
then can also be programmed direct from the handset in the following way
Press programm
Press DSS key
default passcode is 0000
cancel to delete any existing programming
dial park bay number (this not match any directory numbers)
press next DSS key or programm to exit
RE: Customer Request
*GRIN*
Peter
PS I hope you know I'm just teasing you
RE: Customer Request
Appologise to anyone who had dificulty following it
Ps, NP peter I can tell a joke when I see one