×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

SMDR Print for TD500 Ver2.5

SMDR Print for TD500 Ver2.5

SMDR Print for TD500 Ver2.5

(OP)
I have an Epson LX300+ serial printer for printing SMDR output (hotel application)it is cabled as per the manual
and prints after activity on the phone system but the print is in giberish, not much info in the printer docs does anyone know what to change.
Thanks

RE: SMDR Print for TD500 Ver2.5

Serial settings must match. I'm not sure about the D500, but if it's the same as the smaller models, its 9600 baud, Even parity, 7 data bits, and 1 stop bit. Also try 19200 baud.

RE: SMDR Print for TD500 Ver2.5

(OP)
Thanks for that,
I realise that this was probably the case I was hoping that someone could tell me how to change the baud rate on the printer or at least find out what the setting on the printer is.

RE: SMDR Print for TD500 Ver2.5

(OP)
thanks for the link,
the owner of the printer finally found the CD-ROM that came with the printer,
Info for anybody who wants it
On Epson L300+ serial printer hold down Tear off button while turning on power (must have paper loaded into printer) it will print out instructions and what values are loaded at the time.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close