×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

A few Electra Elite 48 issues...

A few Electra Elite 48 issues...

A few Electra Elite 48 issues...

(OP)
We just opened an office and inheriated an Electra Elite 48 system with the building we are leasing.  Basically, we have 4 lines coming in from the telco.  The system was setup for 8 handsets on the first 8 pairs, and the next pairs were CO1 and CO2.  I punched down the 3rd and 4th lines on the Next 2 pairs.  

I'm pretty sure the CO Card in there supports 8 lines.  The two lines punched down have their respective numbers programmed Memory Block 3-00 and 3-01 is set for OUT&IN on all 4 lines.  

The two lines ring in, but it flashes red on either LK3 or LK4 (whichever line is dialed) and cannot be picked up. LK1-LK4 are set with the appropriate CO 1-4 in Telephone Phone Mode Memory Block 4-12 (i believe).  Also you can not select lines 3 and 4 to pick up a line.  And there is no rollover is lines 1 and 2 are busy.  Lines 1 & 2 were setup previously and work fine.

I looked through the Menu's from the phone terminal for everything that looked pertinant to me, and it seemed that all settings for CO1 and C02 when compared to CO3 and CO4 were setup identical.  I know i'm obviously missing something here.  What might it be?

Thanks in advance.

RE: A few Electra Elite 48 issues...

Maybe DIT and ANA as far as not ringing in but not being able to select them has me stumped.
Press Feature then line 3 and tell us what it says on the display, and line 4 also.

RE: A few Electra Elite 48 issues...

Do Feature 4 and press line 3 or 4.  It may say DIT/ANA as curlycord suggested.  Check 4-01 for ring assignment.

RE: A few Electra Elite 48 issues...

BTW.....you are so lucky to have inherited an Elite.

RE: A few Electra Elite 48 issues...

Have you looked at the trunk restrictions for the phones? They may be set for restriction (No Access) if the previous owner had a seperate business in with them. Look at MB 4-19, if the lights are on, then turn em off..

RE: A few Electra Elite 48 issues...

If your lines 1 & 2 are busy and it doesn't roll over to 3 & 4 at all (key should at least flash on your phone) you might want to call your tel service provider (i.e. Bell) to add those 2 last lines in your rollover group (Line 1 being the pilot). Good Luck!!

RE: A few Electra Elite 48 issues...

I HAVE AN ELITE ELECTRA 48 WITH ONE CO-4 CCK CARD AND USING THE FIRST AMPHENOL TO CONNECT THE ONBOARD DIGITAL STATIONS TO A DTU-16D TELEPHONE ONTO THE 1ST PAIR DOES NOT GIVE POWER TO THE TELEPHONE. DOES ANYONE KNOW IF THIS SYSTEM HAS TO BE INITIALIZED OR DO I HAVE TO SET THE SWITCH SETTINGS. ALL SWITCHES ON THE BACKPLANE ARE SET TO THE DOWN OR OFF POSITION.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close