×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

I will ask the first question here.

I will ask the first question here.

I will ask the first question here.

(OP)
I will ask the first question here.
I am working on a MICS 4.1 system with E&M  lines to a cisco
1750 router VOFR ( voice over frame-relay ). The problem that I am having I believe is to be from the Norstar. When I
dial an extension from the far end say x-421 it will not ring through, however I do see a line become active as if the switch answers it. I have setup the  E&M lines for auto answer wink-start DTMF. The Target lines are built starting at 145.

I can dial from the meridian to the far end with no trouble.
If I set the E&M lines to manual answer and set the extension to ring then it works. Another issue is that when the DISA is set to yes I do not hear the stuttered DT. I have check all my programming several times and I am at my wits end.

Not bad for the first question !!!!!!!!

Jeter@LasVegas.com
J.Fisher CCNA

RE: I will ask the first question here.

(OP)
I have solved my own problem. I will post the out come in a few days.

Jeter@LasVegas.com
J.Fisher CCNA

RE: I will ask the first question here.

(OP)
In a nut-shell the problem was from the Cisco router.
The dial-peer voice commands I setup using wild card ( .... ) .= any digit. The norstar did not like this entry. So I replaced the ( ... ) with a 4 . Now the far end accesses the E&M lines DIALS 4 plus and extension or dial 4 and 51 to access a line group to make local calls.

Case Closed !!!!!

Jeter@LasVegas.com
J.Fisher CCNA

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close