×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

2000ivs2 direct connect

2000ivs2 direct connect

2000ivs2 direct connect

(OP)
We have a 2000ivs2 that we can not direct connect too, we have ruled out the cable, the pc,and the cp14.Could their be a problem in the programming,we connect remotely just fine.The error message comes up: Error Ox20053,unknown divice error on device,Direct://Ocala Springs Direct@converted folder.Thanks for any help.

RE: 2000ivs2 direct connect

Have you tried direct connecting to port 1 on the cpu by shutting off switch 4 when direct connecting, then turning it back on for modem connections?

RE: 2000ivs2 direct connect

(OP)
Yes but it also failed,any other suggestions,thanks.

RE: 2000ivs2 direct connect

(OP)
Yes but it also failed.any other suggestions,thanks.

RE: 2000ivs2 direct connect

Next I would look at command 4000>0>and be sure it says none. Also try manipulating the other 40 commands for port 0.  

RE: 2000ivs2 direct connect

what are you using to connect with Matworx studio or Matworx IPS

RE: 2000ivs2 direct connect

After you have verified your baud rate in command 4008>
Try connecting with hyper terminal.
The commands are as follows
Turn on your Caps Lock
Also set up you properties as vt100
 
F2 . (period)

F3 : (Colon)

F4  Enter

F6 - (dash)

F8 Space bar

F9 / (forward Slash)

 

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close