Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEAX 7400 m120 PHS troubles
- Thread starter zspecial
- Start date
you must "roll" the pairs at the mdf cross connect. try connecting the switch side only in this sequence: Orange / White , White / Orange, Blue / white, White /Blue. yes it seems backwards.
Only reverse ONE side of the cross connect and they should fire up. try turning up one of your ZT's at the MDF first.
Only reverse ONE side of the cross connect and they should fire up. try turning up one of your ZT's at the MDF first.
- Thread starter
- #3
>you must "roll" the pairs at the mdf cross connect. try connecting the switch side only in this sequence: Orange / White , White / Orange, Blue / white, White /Blue. yes it seems backwards.
Yeah, got that already, so the transmit and receive of the cell station meet the receive and transmit of the system.
>Try turning up one of your ZT's at the MDF first.
ZT's?
Yeah, got that already, so the transmit and receive of the cell station meet the receive and transmit of the system.
>Try turning up one of your ZT's at the MDF first.
ZT's?
- Status
Similar threads
- Locked
- Question
