Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Oracle : Intermittent 3113 errors

Oracle : Intermittent 3113 errors

Oracle : Intermittent 3113 errors

I Have an VB6 application running with Oracle 8 Database.
This application works fine on the LAN, but there are intermittent 03113 errors when trying remote connexions.
Server : W2K;Oracle8
Client : W98,WXP
      (ADDRESS = (PROTOCOL = TCP)(HOST = = 1521))
      (SERVICE_NAME = bacmre01.ca12)
sqlnet.ora :
trace file :
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x40
nsrdr: normal exit
nsdo: entry
nsdo: cid=1, opcode=85, *bl=2037, *what=0, uflgs=0x0, cflgs=0x1
nsdo: nsctx: state=6, flg=0x620c, mvd=0
nsdo: gtn=143, gtc=143, ptn=10, ptc=2048
nserror: entry
nsdo: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqer: entry
nioqer: incoming err = 12151
nioqce: entry
nioqce: exit
nioqer: returning err = 3113
nioqer: exit
nioqrc: exit
nioqds: entry
nioqds: disconnecting...
Have you an idea about this problem ?

RE: Oracle : Intermittent 3113 errors

Try this note from metalink to see if it helps. I think 12151 is your real concern, 3113 is a result of this.

Doc ID:  Note:71921.1
Subject:  ORA-12151, ORA-12571 errors on Windows NT

To provide an overview of how to verify and handle errors ORA-12151 and
This notes applies to anyone facing intermittent SQL*Net read and write error
when using Oracle SQL*Net or Net8 on Windows platforms.
ORA-12151 and ORA-12571 errors on Windows NT
Intermittent SQL*Net TCP/IP read and write errors are sometimes encountered  
on Windows NT. The underlying reasons of these errors are a synchronization
error in the TCP/IP layer on Windows NT. To help prevent this kind of error, a  
few things can be adjusted to help the synchronization:
1. TCP.NODELAY parameter
   This parameter may be added to the PROTOCOL.ORA file in the  
   NETWORK\ADMIN directory.
   In most cases, TCP/IP data sent across the network is buffered until at
   least a complete network packet can be send. This means that in certain
   cases, commands are not issued directly, and kept buffered until some other
   data can be sent as well. This has the potential to generate time-outs and
   errors. To avoid this, the delay can be switched off.
   tcp.nodelay = yes
2. DISABLE_OOB parameter
   Another possible cause of ORA-3113/ORA-12151 is caused by a known issue
   affecting the TCP/IP stack on Sun Solaris, for which the only available
   workaround is to disable out-of-band breaks. The issue is discussed in  
   detail in [NOTE:1068560.6]. [NOTE:1016295.4] and [NOTE:120498.1] discuss
   this little known and used parameter.
2. Disabling AUTOMATIC_IPC
   On client PC's, checking for IPC connections is pointless as there
   is usually no database residing on them. To save time during the connection   
   phase, set AUTOMATIC_IPC=OFF in the SQLNET.ORA file.
   If you have a static environment, it is recommended to explicitly specify
   this parameter in the SQLNET.ORA file. The parameter specifies how  
   the Transparent Network Substrate (TNS) resolution is to take place.
   By default, if this parameter is not present - the SQL*Net layer
   will first check if there is a Names Server anywhere on the network, after
   which it checks for the existance of local TNSNAMES.ORA file.
   If you only have a TNSNAMES.ORA file, it is recommended to explicitly specify
   the parameter to avoid unecessarily searching for Names Servers - this not
   only speeds up TNS resolution, but also prevents unecessary SQL*Net trace
   file generation when SQL*Net tracing is enabled.
   The parameter value is a comma separated list, with the possible values of:
   (Directory Cell Environment (DCE)).
4. TCP/IP timeouts on NT
   The default retransmission count on Windows NT is 5, before it detects that
   the network is down. With the value of 5, the actual timeout is
   aproximately 15 seconds.
   This default value can be easily increased to a higher value by modifying
   TCP parameters in the Windows registry i.e.
               TcpMaxDataRetransmissions  REG_DWORD  "number"
   By default, the parameter is not present in the registry. If modifying the  
   parameter for the first time, it will need to added.
   The parameter can be useful on both client and data server. The recommended  
   first course of action is to add the parameter on the machine generating the
   SQL*Net errors. If problems persist, add or modify the parameter in the
   registry of the data server or other machine/s.
5. TCP/IP keepalive on NT
   KEEPALIVE is an extension to TCP/IP which enables the closing of dead
   connections that are no longer being used.  
   Problems can occur when the server does not close a connection after a
   client process has disappeared or terminated abnormally. This typically
   happens when a user switches off or reboots their machine whilst still  
   connected to Oracle.
   Note: this is not an Oracle problem, but a limitation of TCP/IP, which has
         no way of knowing whether a remote connection has disappeared.
   This feature is enabled by default on Windows NT, however the deafult value
   is 2 hours. Problems can arise however if the timeout value is set too low
   for some heavily used or slow networks. Under these conditions, the
   KEEPALIVE registry value can be used to specify a KEEPALIVE value before a
   connection gets cut.
               KeepAlive  REG_DWORD  "number"
   A value of 10 minutes is a typical value used.
   Again, the parameter can be useful on both client and server.
   Start with the machine generating the error, and if needed, add it to the
   data server or other machine/s.
6. TCP/IP timeouts on Windows 95/98
   The same parameter may also be used under Windows 95. It performs the same
   functionality, however only the location of the parameter is different.
               TcpMaxDataRetransmissions  REG_DWORD  "number"
   Again, the parameter is not present in the registry by default. This means
   the parameter must be added to the registry the first time it is modified.
7. SDU & TDU parameters
   Part of the problem may be the sequence of information that is transmitted.
   If there are disruptions in the sequence, errors ORA-12151 and ORA-12571 can
   also appear, alerting the application that not all information has been sent
   across the network succesfully.
   The sequence of information is determined by the amount of data the program
   is sending and the actual size the protocol can send across the network
   at a time.  
   The more data the program wants to send in one 'go', the more sequences and
   transport packets will have to be made.
   By default, SQL*Net uses a Session Data Unit SDU) of 2048 bytes (2Kb)
   and a Transport Data Unit (TDU) of 32768 (32Kb) bytes. On standard Ethernet
   connections, without modification, the SDU is 1500 bytes and TDU 8760 bytes.
   With these values, each data request made by SQL*Net must be split into  
   several smaller packets to be able to be transmitted.
   Therefore, where errors occur, it is recommended to minimise the creation of
   unecessary additional packets by synchronising the SDU and TDU parameters at  
   the SQL*Net level with those of the actual network topology/protocol in use.
   To use non-default SDU/TDU values, the parameters must be configured within
   both client and server SQL*Net configuration files as follows:
       (ADDRESS_LIST =  
          (ADDRESS =(PROTOCOL=TCP)(HOST=foobar)(PORT=1521))
        (CONNECT_DATA =  
          (SID = ORCL)
        (SID_LIST =
          (SID_DESC =
            (SDU = 1500)
            (TDU = 8760)
            (SID_NAME = ORCL)
   For additional information regarding SDU and TDU parameters, refer to  
   [NOTE:44694.1]: SQL*Net Packet Sizes (SDU & TDU Parameters).
8. Setting a new TDU size on Windows NT
   You can modify the TDU size on Windows NT, via the TcpWindowSize parameter:
               TcpWindowSize  REG_DWORD  "number"
Additional information about Windows NT network parameters:
Q120642: TCP/IP & NBT Configuration Parameters for Windows NT
Q140375: Default MTU Size for Different Network Topology

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close