Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Outcalling help
- Thread starter itech2004
- Start date
crashtest1000
Vendor
You will need to modify the Source codes for that particular user plus add a default callback start point in VM Pro for the user.
This paragraph is from the help file in manager. On the documentation CD there is an exercise on how to do this. The documentation CD comes with every system and is very handy ask your installer for it.
Source code
P<Telephone Number> = Voicemail Ringback Number
For user's with voicemail ringback enabled, this entry sets the ringback destination to a number other than the user's own extension. The voicemail server will ring that number when the user has a new voicemail message. Enter P followed by the telephone number including any necessary external dialing prefix, eg. P917325559876
. This facility is only available when using VoiceMail Pro through which either a default Callback start point or a user specific Callback start point has been setup.
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
This paragraph is from the help file in manager. On the documentation CD there is an exercise on how to do this. The documentation CD comes with every system and is very handy ask your installer for it.
Source code
P<Telephone Number> = Voicemail Ringback Number
For user's with voicemail ringback enabled, this entry sets the ringback destination to a number other than the user's own extension. The voicemail server will ring that number when the user has a new voicemail message. Enter P followed by the telephone number including any necessary external dialing prefix, eg. P917325559876
. This facility is only available when using VoiceMail Pro through which either a default Callback start point or a user specific Callback start point has been setup.
- Thread starter
- #3
- Status
