Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I have a Panasonic TX-TD1232 and TVS100

Status
Not open for further replies.

kinlim

MIS
Joined
Jan 23, 2004
Messages
3
Location
US
How can I program the voicemail to answer the CO lines?
 
you need to program the lines to ring the ports you are using for VM
 
Thanks, I will verify that.
 
I install the phone at the voicemail port but I did not see anything on the display. Do I have to add the CO lines before assign it as a voicemail port?
 
Use Line DIL programming in the PBX to have the voicemail answer immediately. Use line group programming to enable "intercept" and set the number of rings in intercept time programming for a delayed answer. Specify the voicemail's hunt group extension as the target (most likely 165).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top