Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Number of records per page 1
- Thread starter holiness
- Start date
-
1
- #2
synapsevampire
Programmer
Lots of possibilities here, and nothing to go on...
Are there groups? Is the Keep Group Together turned on?
Each section within Crystal has a keep together and a new page after/before which might be causing this (right click the section on the left side and select format section or section expert depending upon your version).
And any group can have it's keep together on which might cause this (right click the group on the left side and select change group).
Or the height of a section might cause this.
And other things...
-k
Are there groups? Is the Keep Group Together turned on?
Each section within Crystal has a keep together and a new page after/before which might be causing this (right click the section on the left side and select format section or section expert depending upon your version).
And any group can have it's keep together on which might cause this (right click the group on the left side and select change group).
Or the height of a section might cause this.
And other things...
-k
- Thread starter
- #3
- Status