NEC Electra 48 w/Elite voicemail
NEC Electra 48 w/Elite voicemail
(OP)
I have installed a NEC Electra 48 with a voicemail Elite in slot 07 for a friend that wanted to reuse it from another site ( I mostly work on Avaya )
I worked on them awhile ago but can get around logging into x100 or x101 ...also using cosession for the voicemail
*my question is this we have ports 01-08 (x100-107) on the first 8 pairs ...w/blue to rd/grn pairs
(4 port co card in slot 02) pairs 9-12 for co # 1 - #4
rd/brn to black/orange pairs
8 port Digital card in slot 03 pairs pairs 16-24
yellow/orange to v-/brn pairs
since we are adding more co trunks I programmed slot 04
for a 4 port co card ...card is back ordered ....I will
install it at a later date ...can the co card be installed
while the power is on I know if you do anything with the voicemail card you make busy with the dip switch on vm card and wait 45 - 60 seconds before pulling card ...I programmed all the phones for lines 1-8 and dit day to ring voicemail ....
will trunks 5-8 fall on the second amp pairs 1-4 being w/blue to w/brn pairs
is there a cheat sheet for the color code depending on what card you install in what slot ???I looked through a Manual
on cd and found nothing
its a pretty nice little system for the small business
world and the customer has some other bigger NEC systems
through out the country ....like I said we mostly deal
in Avaya systems but did this for a favor for them
Thanks for any and all posts
I worked on them awhile ago but can get around logging into x100 or x101 ...also using cosession for the voicemail
*my question is this we have ports 01-08 (x100-107) on the first 8 pairs ...w/blue to rd/grn pairs
(4 port co card in slot 02) pairs 9-12 for co # 1 - #4
rd/brn to black/orange pairs
8 port Digital card in slot 03 pairs pairs 16-24
yellow/orange to v-/brn pairs
since we are adding more co trunks I programmed slot 04
for a 4 port co card ...card is back ordered ....I will
install it at a later date ...can the co card be installed
while the power is on I know if you do anything with the voicemail card you make busy with the dip switch on vm card and wait 45 - 60 seconds before pulling card ...I programmed all the phones for lines 1-8 and dit day to ring voicemail ....
will trunks 5-8 fall on the second amp pairs 1-4 being w/blue to w/brn pairs
is there a cheat sheet for the color code depending on what card you install in what slot ???I looked through a Manual
on cd and found nothing
its a pretty nice little system for the small business
world and the customer has some other bigger NEC systems
through out the country ....like I said we mostly deal
in Avaya systems but did this for a favor for them
Thanks for any and all posts
RE: NEC Electra 48 w/Elite voicemail
Slot 1,3,4 Correspond to Amp 1
Slot 5,6,7 " " Amp 2
I am not use to looking at the Amps by color assignment. I usually just split the 66 block in to three parts (8 Pairs each)
Each slot can have a total of 8 Ports (8 Pairs) --
So, in your configuration it should be like this,
Built in ESI ports (Slot 1) - 1st Eight pairs on Amp 1
Slot 2 does not have a voice path - Use only for MIFM card (or other cards not requiring a voice path)
8 Port ESI card (Slot 3)- 2nd Eight Pairs on Amp 1
4 Port Co Card (Slot 4) - 3rd Eight Pairs on Amp 1
4 Port CO card (Slot 5) - 1st Eight Pairs on Amp 2
Voicemail Card (Slot 7) - 3rd Eight Pairs on Amp 2 (which are not going to be used because its all software anyways)
Let me know if you have any questions. If you have the CD look over the Hardware Manual.