×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

NEC Electra Elite - CO trunks as buttons.

NEC Electra Elite - CO trunks as buttons.

NEC Electra Elite - CO trunks as buttons.

(OP)
I would like to place 3 loop-start CO trunks as buttons on ten 8 button display phones (similar to private line I think)and use the other buttons as 'busy indicators' for the other phones.  I have the feature book but I am not having much luck.  I am setting this system up from scratch.
I would be happy to assist with any Avaya questions.
Thanks in advance.

RE: NEC Electra Elite - CO trunks as buttons.

In th e Elite system, you can accomplish this by going to memory block 4-12, select the approiate port number and use line key 2 to select the CO ports you want for each button and then select line key 6 to assign "feature access" keys. You can also use the copy mode feature if all of your phones are going to be IDENTICAL, but be sure to go thru every command in  memory block 4-XX before using this feature.
The feature access keys define user programmable keys and after assigned, must be programmed from each phone as per the user guide. (Depress Feature button, Depress Key to be programmed, then dial 1 to indicate an extention number followed by the specific extention that you want to appear).

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close