How did you coonfigure automatic backyuup of the wan link?
I have only been able to manualy activate a fallback service.

If the 1st fails then the ISDN backup will kick in, if this fails you wont be able to have a 2nd as the ISDN will be down!

Two cans and a piece of string!

The idea was that a second ISDN backup call should be placed to a third site over another ISDN line if the first backup was down.

Yes , how did you config auto backup ?

If you want to automatically backup a WAN link all you need to do is put an ISDN number for the remote site in the Service that you use for the WAN connection.

I normally use a spare DDI at the remote site and create an incoming call route pointing to the RAS associated with your WAN link and dial that.

You could create a fallback service for the alternative site and manually activate it if you need to.

Thanks, davemead. First backup was done like you wrote. The second backup with fallback, as you said, is the only option.

Hi

Version 2.0 is going to support RIP I/II. That will even make it possible to use an standard router as to backup or the IPO as ISDN backup to another router.

/SV