Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to set night mode feature- Elite 192 3
- Thread starter Xaqte
- Start date
-
1
- #2
-
1
- #3
Hey,
Waynefla is correct but you need to do this from ext. 100 or 101 due to attendant feature classes, or check class of service program to make sure Night Mode by staion dialing is enabled.
Hope this helps.
Jerry Pannell
techs@sclb.com
Waynefla is correct but you need to do this from ext. 100 or 101 due to attendant feature classes, or check class of service program to make sure Night Mode by staion dialing is enabled.
Hope this helps.
Jerry Pannell
techs@sclb.com
- Thread starter
- #4
-
1
- #5
Xaqte,
Did you want to program the night feature back onto a feature access key?
While on-hook, press: [Feature][Redial][Button to be programed][Answer][Feature][80][Feature]
Pressing the [Answer] key followed by [Hold],[Transfer],[Answer],[Speaker],[Redial],[Conf],[Recall],
or[Feature]will store that function into the key.
John Losego
LOSEGO.NET
john@losego.net
Did you want to program the night feature back onto a feature access key?
While on-hook, press: [Feature][Redial][Button to be programed][Answer][Feature][80][Feature]
Pressing the [Answer] key followed by [Hold],[Transfer],[Answer],[Speaker],[Redial],[Conf],[Recall],
or[Feature]will store that function into the key.
John Losego
LOSEGO.NET
john@losego.net
- Status
Similar threads
- Locked
- Question
