Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

WINv311 connecting to XP Pro

Status
Not open for further replies.

G0AOZ

Technical User
Joined
Nov 6, 2002
Messages
2,342
Location
GB
Needed to get an XP Pro machine talking to a Win 311 PC. Win 311 has been working successfully with 95, 98, NT4 and 2000 Pro without problems, but couldn't find a protocol between XP and 311 which was compatible. Ended up downloading the "Wolverine" files, and running TCP/IP which is fine.

Just out of interest, am I correct in assuming that this is the only way to network these two operating systems from different eras?

ROGER - G0AOZ.
 
Haven't tried it with XP cause I'm not into S&M but suspect that you could do it with Lantastic. Probably other ways too, but just haven't felt the need to experiment.

Ed Fair
Any advice I give is my best judgement based on my interpretation of the facts you supply. Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
 
Thanks for that Ed... I really meant between the protocols that are available within Win 311 and XP Pro, i.e. NetBEUI, NetBIOS, IPX, etc. Couldn't find a common one that'd work...

The "Wolverine" files, i.e. WFWT32.EXE etc., work fine, but for some unknown reason Microsoft have just "pulled" the path off their FTP site. Strange or what...?

ROGER - G0AOZ.
 
Here's the URL for those Windows v3.1x Winsock files:-

ftp://ftp.microsoft.com/peropsys/windows/public/tcpip


ROGER - G0AOZ.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top