×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

IPO403 - BRI Backup when WAN down

IPO403 - BRI Backup when WAN down

IPO403 - BRI Backup when WAN down

(OP)
Dear Users and Admins and Others
Hardware = IPO403 - ver. 1.3(32)
WAN = HDSL 2048bit (protocol V.35)
Inside configuration I've added correctly WAN all options and WAN works correctly (!). I've added BRI numbers in field TelephoneNumber in Service (Intranet Service SiteB) at SiteA and my problem is that I've to wait very long time for connection via BRI (when power on HDSL is off)and very offten SiteX cannot make connection via BRI to SiteY.

Are any ShortCodes for estabilish connection from X->Y or from Y->X manually from any phone (BRI at SiteX is 1000 at SiteY is 2000)?

Or maybe I should dosomething different to estabilish connection automatically when DATA or VoIP is comming?

Mathias

RE: IPO403 - BRI Backup when WAN down

(OP)
Dear IPO Admins.
When you connect IPO BRI to PBX end-user line - IPO is looking for channels in BRI started on CH1 and after non-signal started in CH2. So CH1....CH2....Ch1....Ch2

To correct connection in BRI BCKP you must dial manually "bad channel" andstay ready on good Channel in both lines (both IPO).

When you connect BRI directly from PSTN or NT everything is working correctly.

BR MATT

RE: IPO403 - BRI Backup when WAN down

Correct me if I have the wrong idea, I'm assuming you are passing voice traffic;

Why not make the ISDN on line group 0 which is default, and you HDSL on line group say 20.

In site A;
Shortcode:
 For ISDN use "9N,0207299N,0,dial" (where N is the extn number of site B, and 0207299 is the first half of ISDN number at site B)
 For HDSL use "N,.,20,dial"

etc etc


Best speak to your provider. How often do you use your ISDN 2 circuits? I know for a fact if you use BT (I'm from UK) and your ISDN2 is not used for a month, BT will make the circuit go down. Hence, it's useless as backup line, unless you make the odd call on the ISDN2.

RE: IPO403 - BRI Backup when WAN down

(OP)
About your post.
You are right! Everything was OK when I've connected to NT (directly to BRI). In my office I've used end-user line from PBX, because we have only that card. All your tips are Ok. It works OK on voice-end-user BRI.
BR

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members!

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close