Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Mics 4.1 software

Mics 4.1 software

Mics 4.1 software

I have the regular 4.1 for the MICS.

Does this version of the software permit expansion for a 0x16 station module in addition to a 12x0 trunk module?

MICS recognizes the 12x0.

MICS won't recognize the 0x16, just blinks. Is it the software or probably the hardware?

RE: Mics 4.1 software


The regular MICS 4.1 can have up to 6 modules installed in any combination of trunk and station modules...

There are some rules you have to follow, check them and tell us if it works:

- The fiber expansion cartridge (2 or 6 ports) must me installed on slot 2.

- The copper expansion cartridge (2 or 6 ports) must me installed on slot 1.

- If you have a 2 port expansion cartridge, ports 3 and 4 can be used for Trunk Modules or Station Modules. In this case, connect Trunk Modules beginning at the top (port 4); Connect Station Modules beginning at the bottom (port 3).

- If you have a 6 port expansion cartridge, ports 3 through 8 can be used for Trunk Modules or Station Modules. In this case, Trunk Modules should be connected beginning at the top (port 8) and working down; Station Modules should be connected beginning at the bottom (port 3) and working up.

Hope this help

Email: lumute@adv-solution.net
Yahoo Messenger: Lumute
MSN Messenger: gonzaloparra@telcel.net.ve

RE: Mics 4.1 software

Is it the 0x16 light that blinks?
Plug it into port 3 of the expansion card and see if it shows up in maintenance under module status.
A blinking light is a bad sign and would most likely mean a defective 0X16.
Try also to see if the port 3 is disabled and if so re-enable or even disable it then re enable it for the hell of it.

~Will Nortel soon be NoTel??~

RE: Mics 4.1 software

Thanks all. The 0x16 was defective and once replaced the system works OK.

Nortel (Notel)is at a low price yes.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close