Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Which ports does the voicemail use? 1
- Thread starter ty0004
- Start date
-
1
- #2
If you are installing a fiber NAM to the MICS then you will simply plug the DS 30 fiber cable into an available expansion port off of the 2 or 6 port expansion card that would be installed into slot 2.
The NAM will choose which ports it will use. To find out what it choose, do a Feature 985. The set number that comes up is what you will use in Forward No Answer settings etc. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
The NAM will choose which ports it will use. To find out what it choose, do a Feature 985. The set number that comes up is what you will use in Forward No Answer settings etc. MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
lowradiation
Technical User
If it is a StarTalk Flash - any digital ports will do. I usually put them on the last available.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
