Loaded IBM Client Access for Win95, and ran into problems trying to log into the Network using Novell 4.11 Intranetware Client 2.2 & 3.0. Novell would hang on the login screen. You could right click Network Neighborhood, select Intranetware login and that would allow a connection to the network, but end-user PCs have the Network Neighborhood icon disabled through Poledit, any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Problems w/ IBM Client Access for 95 & Novell 4.11 Netware Client
- Thread starter dogboy
- Start date
Client Access Supports Native TCP/IP. I would advise against the 32 bit DLC (APPC) Connection.
On Client Access Connections just use the Connections Wizard (New Connection) with the IP Address of your AS/400 and it should work.
Randy Cooke
IS Manager
Elkview Coal
On Client Access Connections just use the Connections Wizard (New Connection) with the IP Address of your AS/400 and it should work.
Randy Cooke
IS Manager
Elkview Coal
i want to make server with windows NT using tbase10 hub/utp cabling and want to connect 5 users to it.
I have done the cabling.My problem is that while loging i am able to locate my 5 clients from clients only, but I am not able to locate my clients from server.I'm running win98 on my clients.
Kindly help me out
I have done the cabling.My problem is that while loging i am able to locate my 5 clients from clients only, but I am not able to locate my clients from server.I'm running win98 on my clients.
Kindly help me out
- Status