×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

e&m configuration for router

e&m configuration for router

e&m configuration for router

(OP)
This is my configuration on my router for the e&m tie lines to the norstar mics 4.0 system.  There is another location with the same configuration of router and norstar.  I have the wiring correct but I cannot seem to get the call to route to the other router.  Is there something i'm missing?  I could have sworn i did this same configuration before and it worked, but i'm having problems with this setup.

voice-port 3/0/0
 input gain 6
 no comfort-noise
 operation 4-wire
 type 2
!
voice-port 3/0/1
 input gain 6
 no comfort-noise
 operation 4-wire
 type 2

dial-peer voice 7100 voip
 destination-pattern 71..
 session target ipv4:x.x.x.x

any help would be appreciated.

Ralph

RE: e&m configuration for router

heres a working config!!!
your destination patterns may be have to to be changed from
.... to say 4..  (.) <-- being an any



interface Serial0
 description Frame Relay VOFR DLCI 70 128K DLCI 71 256K
 no ip address
 encapsulation frame-relay
 service-module t1 timeslots 1-6
 frame-relay traffic-shaping
 frame-relay lmi-type ansi
!
interface Serial0.1 point-to-point
 bandwidth 128
 ip address 192.168.1.1 255.255.255.252
 frame-relay interface-dlci 70 IETF   
!
interface Serial0.2 point-to-point
 bandwidth 256
 ip address 192.168.1.5 255.255.255.252
 frame-relay interface-dlci 71 IETF   
  class voice
  vofr cisco
!
interface FastEthernet0
 ip address 10.1.1.1 255.255.255.0
 speed 100
!
router eigrp 100
 network 10.0.0.0
 network 192.168.1.0
 no auto-summary
 no eigrp log-neighbor-changes
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.1.2
no ip http server
!
!
map-class frame-relay voice
 frame-relay cir 256000
 frame-relay bc 2560
 frame-relay mincir 64000
 no frame-relay adaptive-shaping
 frame-relay fair-queue
 frame-relay voice bandwidth 48000
 frame-relay fragment 360
!
voice-port 1/0
 operation 4-wire
 type 2
!
voice-port 1/1
 operation 4-wire
 type 2
!
voice-port 2/0
 operation 4-wire
 type 2
!
voice-port 2/1
 operation 4-wire
 type 2
!
dial-peer voice 1 pots
 destination-pattern ..........
 port 1/0
!
dial-peer voice 2 pots
 destination-pattern ..........
 port 1/1
!
dial-peer voice 3 pots
 destination-pattern ..........
 port 2/0
!
dial-peer voice 4 pots
 destination-pattern ..........
 port 2/1
!
dial-peer voice 5 vofr
 destination-pattern .
 session target Serial0 71
 dtmf-relay
 no vad

Jeter@LasVegas.com
Fisher CCNA
Sprint-Data

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close