×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Local Area Mobility

Local Area Mobility

Local Area Mobility

(OP)
I am looking for the Nortel equivalent of Cisco's Local Area Mobility option. And if Nortel Does have it does it work over Layer 3 switches.

thanks, chuck

RE: Local Area Mobility

Chuck, looking to have roaming wireless users?

I made a single subnet for wireless, over 6 accelars and 20 450 and BPSes.  This is not high performance in the sense that you have a single broadcast domain and only one accelar is acting as the router, but as I only put the wireless traffic there, and I wish to 'harden' my internal network from wireless attacks anyways, these were acceptable for me!

jimpalmer@citlink.net

I tried to remain child-like, all I acheived was childish.

RE: Local Area Mobility

(OP)
so basically you created a ip Vlan that spans across the 6 accelars and the 450s. Is that correct?  

RE: Local Area Mobility

Yes  the part that I was not aware of before I tried it, was that on the accelars, if you do not give the VLAN an IP address, it acts more like a switch, not a router.  Then the accelar that does have an IP is the only point of contact to the wireless VLAN

I tried to remain child-like, all I acheived was childish.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close