×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

getting the extension # on a M7310
4

getting the extension # on a M7310

getting the extension # on a M7310

(OP)
I am probably asking a question with an obvious answer.  How can I find out what extension number a phone is assigned ?  It seems I need the extension numbers to rename the phones, and pretty much all other programming.

All our M7310 phones have names programmed.  I need to change the names on 2 phones, ( 2 users decided they liked each others better after the offices were renovated, ...one phone is beige, other black, so they swapped  )  Now the wrong phone rings when you use the intercom buttons.  Should I reprogram or should I set the phone to "relocate", and if so how?  

thanks for patience, and helping a newbie...

RE: getting the extension # on a M7310

3
Feature *0 and press the intercom key and that will give you the ext. Looks like set relocate was set to yes and that`s why they don`t ring properly. All programming moves with the phone if it`s set to yes. Easiest thing to do would be to move them back, turn set relocate off, and then move the phones. Here`s how you do it in case you don`t know.

Use a 7310 or 7324 set.

Feature **config
Password config

3 programming buttons will light up (4 once you enter a topic) They mean the following

Heading           Show
Back              Next

If it comes up Terminals and Sets
Hit next until you get to System Programming
Hit show then next until you get to Feature Settings
Hit show then next until you get to Set Relocate and change to no

If it comes up Configuration
Hit show (Trk/Line data will appear) then next until you get to Miscellaneous
Hit show then next until Set Relocate change to no.

Schlum

RE: getting the extension # on a M7310

(OP)
thank you very much Schlum...

I had done this once years ago, but couldn't remember the whole procedure, and didn't want to go pressing buttons willy-nilly without some clue as to what I was doing!

thanks again!!



Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close