×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Error 4105 with external calls

Error 4105 with external calls

Error 4105 with external calls

(OP)
Hi:
I have a 2008 and a 500 set.  The 500 set is ext2828 and the 2008 has button 0 as ext2828 and is MARP.  When someone internal calls ext2828, calls may be answered at either phone.  External calls, however, encounter the following problem.  When the DID is dialed, the 500 set rings and the 2008 set rings.  When the call is answered from the 500 set, there is dead air.  If the call isn't ansered on the 2008 set, it then hunts to key 1 on the 2008.  On my PBX terminal I get an error 4105.  It says to make sure tenants are same and make sure CLS allows external calls.  Tenants are the same, but I'm not sure which CLS allows/denies external calls or if that is even the problem at all.  Help!

Thanks,
Marty

RE: Error 4105 with external calls

Hi
look in CLS for UDI,if RDI change it
UDI allows external calls,,RDI restricts external calls

Colin

RE: Error 4105 with external calls

(OP)
Thanks, Colin, for your reply, but my switch isn't equipped with that package, so I can't add CLS RDI or UDI--I get SCH3936:need package 131 or something similar...So it isn't tenant and it isn't CLS RDI, any other thoughts?  Is it maybe something on the digital set that needs to be changed?  Still hoping someone can help...  :)

RE: Error 4105 with external calls

Hi
what switch and issue do you have ??

Colin

Colin

RE: Error 4105 with external calls

Look at the first three letters after the CLS prompt when you print out both phones. These are an important part of this process. Post a follow up message and let us know what they are. You can find out about this in the Books under "Access Restrictions"

RE: Error 4105 with external calls

(OP)
Thanks Jerry.  I had the CLS as FRE (fully restricted) to stop users from making outside calls.  I changed CLS from FRE to CTD and now DID calls can be picked up at this phone.  I had no idea FRE denied DIDs.  Any suggestions on CLS to allow DID and internal calls but restrict all outside calls?
Thanks,
Marty

RE: Error 4105 with external calls

Marty,
  If you set the cls to "SRE" they can receive inbound DID calls but can not dial out.
...jerry...

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close