×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

MICS 5.0 and Caller ID

MICS 5.0 and Caller ID

MICS 5.0 and Caller ID

(OP)
We have recently installed an MICS 0x32 (5.0 software) with a T1 card and NAM 4.0 voicemail.  I am a complete novice to Nortel, but the sales guy stated that the T1 card would recognize caller ID when enabled by the telco.  Do I still need a CLID card?  The caller ID has been enabled by the telco but no caller info is displayed.  Have been through the entire CONFIG menu and no apparent options to enable the caller ID from there.  Anyone aware of how to solve this?

RE: MICS 5.0 and Caller ID

Is your 221 set configed to be the caller ID set?

RE: MICS 5.0 and Caller ID

The sales guy forgot to say you also need the PRI enabler.
DueE

RE: MICS 5.0 and Caller ID

(OP)
I am not sure about the 221 set, but will look into it...
We dicussed the PRI issue with the sales guy and he stated that the enabler was not needed since we did not have a PRI T1 line.

RE: MICS 5.0 and Caller ID

My understanding is that caller id will not work on T1 without it being PRI.
DueE

RE: MICS 5.0 and Caller ID

(OP)
The guy told us that since our T1 was not PRI that we did not need a PRI enabler and that the caller ID info would filter down from the line to the MICS automatically.  Sounds like we were misinformed?

RE: MICS 5.0 and Caller ID

try this.
go to Lines>>>trunk/line data>>>
and see if CLID Set is between Prime set and auto privacy.
the programming record shows that CLID set only shows for analog trunks but the Installer guide states that this area would show up for loop start digital lines and E&M digital trunks.  one unfathomable item for norstar is why they only allow one of the ringing phones for a particular trunk to show the caller id data before the call is answered.  after the call is answered this data is available to whoever is on line with that call (feat 811)

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login

Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close