Guest_imported
New member
- Jan 1, 1970
- 0
Is it necessary to purchase an option that allows the Siemens Rolm PBX to output cdr through a serial port on the switch?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Siemens Rolm PBX CDR
- Thread starter Guest_imported
- Start date
- Status
The CDR output is a standard feature that comes with the base system. This is true for both the Rolm 9005 and HiCom series PBXs.
If I recall correctly, information on configuring CDR is available in the CLI reference manual on the 9005 and in a separate CDR booklet for the HiCom. Robert Harris
Communications Advantage
If I recall correctly, information on configuring CDR is available in the CLI reference manual on the 9005 and in a separate CDR booklet for the HiCom. Robert Harris
Communications Advantage
Hello,
If you need help with CDR let me know. I have installed it on three Rolm 9751 pbx. All you need to do is setup a port on the SMIOC card and connect it to a buffer or to a computer with procomm installed. Then start the CDR. If you need more info, please let me know and I can post the instructions here.
If you need help with CDR let me know. I have installed it on three Rolm 9751 pbx. All you need to do is setup a port on the SMIOC card and connect it to a buffer or to a computer with procomm installed. Then start the CDR. If you need more info, please let me know and I can post the instructions here.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
