In line power requirements for 46xx IP Hardphones

rstockton · Jan 25, 2002

Does anybody know the pins to which an IP hardphone is checking for power on? Cisco's data switches provide 48v power through the regular ethernet pins (1,2,3,6) and the power patch panel can provide this through (4,5,7,8).

Does anyone know what the IP Hardphone is checking for power on?

Thanks

-r

lopes1211 · Jan 25, 2002

48VDC on Pins 7&8. A standard Aux power adapter from Avaya like the one on an 8434DX will do the trick. There are also a couple AT&T/Lucent power distribution units which can distribute power from the closet level. The Cisco power patch panel should work but I believe the Cisco switches which provide power will not. Hope this helps.

-CL

rstockton · Jan 28, 2002

Thanks,

Cisco's power patch panel says power is being sent on 4,5,7 & 8. I wonder if this would negativily impact a 46xx checking only on 7&8.

Do you know of the AT&T/Lucent pwr. dist. unit model #s?

We do have pwr adapters but would like to move away from them.

Thanks for your help.

-r

europe · Jan 30, 2002

AVAYA has a 1152A1 mid span powr distribution unit or a Bulk Power unit for 24 sets 1145B

Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

In line power requirements for 46xx IP Hardphones

rstockton

MIS

lopes1211

Technical User

rstockton

MIS

europe

Technical User

Similar threads

Part and Inventory Search

Sponsor