×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

HiPath 3800 not booting after power outage

HiPath 3800 not booting after power outage

HiPath 3800 not booting after power outage

(OP)
Hi,
We have HiPath 3800 system, which not currently in a boot loop after power outage.
All cards showing red alarm. Below is the output from Serial console. Which keeps repeating. Any idea what happened?

loading FPGA: Load O.K.
testing Checksum Firmware: Test O.K.
testing Data-Bus DRAM: Test O.K.
testing Address-Bus DRAM: Test O.K.
testing Pattern 0x55555555: Test O.K.
testing Pattern 0xAAAAAAAA: Test O.K.
FPGA Registers access: Test O.K.
testing ICGX Registers: Test O.K.
testing PHY identifier value: Test O.K.

Power ON Diagnostics (PODS) has passed

MMC load ..... complete
**************************************************
* CBSAP *
**************************************************
Copyright 2003 Siemens AG

Initialized data of startup
System clock setting
Customer database reset
Reset cause (FW: 0x82) (SUp: 7)
SRAM(bat) OK
Hardware ID : 0x04d0
Serial Number : SK76XXXXXX0834
Parts List Version : -10
Bootrom Version : CBSAP_FW_071126
Ethernet Address 1 : 00:1A:E8:18:45:B8
Ethernet Address 2 : 00:1A:E8:18:45:B9
Count reference (12418) (new)
Start double click (7)
End double click (7)
HW_status (0x30)
CBSAP Exp. Box detected
Testing system interrupt
System interrupt done
Initialize and Test ROSA + MMC
Init ROSA + MMC OK, Test passed
CMS Module present
Start operating system
Application vector loaded
Start watchdog test
Watchdog set on 10 minutes
KDS TRUE lLength = 200000
APS1 TRUE lLength_aps = c00000
WP1 TRUE lLength_wp1 = 100000
STARTUP OFFSET = 200
STARTUP LENGTH = 20a
Aps(0) switch(0) reset(1,0)
Start loading and decompressing
HALT on - startup step: 208 (ddsb200)
- error code/cause: 0 (ddsb201)
- exception no.: 0x301 (ddsb202)


MMC load ..... complete
**************************************************
* CBSAP *
**************************************************
Copyright 2003 Siemens AG

Initialized data of startup
System clock setting
Customer database reset
Reset cause (FW: 0x82) (SUp: 7)
SRAM(bat) OK
Hardware ID : 0x04d0
Serial Number : SK76XXXXXX0834
Parts List Version : -10
Bootrom Version : CBSAP_FW_071126
Ethernet Address 1 : 00:1A:E8:18:45:B8
Ethernet Address 2 : 00:1A:E8:18:45:B9
Count reference (12418) (new)
Start double click (7)
End double click (7)
HW_status (0x30)
CBSAP Exp. Box detected
Testing system interrupt
System interrupt done
Initialize and Test ROSA + MMC
Init ROSA + MMC OK, Test passed

RE: HiPath 3800 not booting after power outage

Hi Suzuki Yota,

Can you try move MMC and plus in new orther mainboard HP3800? IT done? ( If done, MMC is ok )
It not ok. this mean is firmware on MMC error. You shouble setup firmware for MMC
You must be remove all card on this box ( only keep mainboard ) . Power on and check it.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close