×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Unable to invoke software installation

Unable to invoke software installation

Unable to invoke software installation

(OP)
Greetings,
I want to install software on cs1k rls 450w


Kindly help...what can be the issue.
Thanks

RE: Unable to invoke software installation

First of all you can't use a 1 gig PCMCIA card.
Up to a 128 Meg card is only accepted and the manufacturer should be SanDisk where possible.

For SSC processor cards, I think NTSK20AB is too old. You will need a newer SSC card. I recall that NTSK20HA was the minimum version that was compatible for use with release 04.50.

What size RAM do you have as I think you need a single 16 Meg rather than the original 8 Meg card on the SSC.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
Thanks for our reply,
I have 128MB card, programmed with cardpro9. Copied extracted files of software 4.5 ap-emea_450w_r20 to flash card. My SSC card is ntdk20ja, software daughter board is ntsk40as , 17. Inserted the pcmcia in slot A, reboot the system , pressed control_I but I got these messages ,,images are attached ..what can be the issue plz...

RE: Unable to invoke software installation

What is the manufacturer of your pcmcia/Compact Flash card?. I've had on many occasions found that some types aren't compatible or that they weren't formatted correctly using the card programmer tool.

What you can do is to format the card on an very old Windows operating system such as Windows 98 / 95 etc or from any non Windows computer such as Linux etc.

As the card is 128 Megs, then just copy the single *.exe file onto the card and run the extraction from it as there will be plenty of space.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

Try and obtain a SanDisk card.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
SanDisk obtained,
Software started successfully,,but keycode not validating..is there any issue with FEATURE SRT SELECTION according to ntsk40ac card..because the options does not shown for ntsk40ac in software package which I am installing.. I think I will need rls 4.5 software for ntsk40ac

RE: Unable to invoke software installation

(OP)
Firebird do you have rls 4.5 software for ASIAPAC ntsk40ac or ntsk40ab ?

RE: Unable to invoke software installation

Yes I have all the software releases. Just follow my link.

Due to browser security changes, you might need to edit the link and use an FTP client such as Filezilla ftp client to access the files.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
Thanks Firebird, I have checked the ftp link. There are 2 copies available for small system software release 450w, but unfortunately the Feature set for NTSK40AC and NTSK40AB is not available in the package.

RE: Unable to invoke software installation

There were only two versions released. Are you certain that it's release 04.50w ?. Did you have a Nortel sheet?

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
Thanks for your reply,
Here is a screenshot from technical bulletin..

RE: Unable to invoke software installation

(OP)
These are the options available for FEATURE SET..

RE: Unable to invoke software installation

(OP)

RE: Unable to invoke software installation

(OP)
Yes, I have tried it's all Feature sets but at the end facing issue keycode INVALIDATION, even I am having the keycodes with requisite available dongle

RE: Unable to invoke software installation

Is the system currently in use?

If so, then you can go into LD 143 from TTY 0 and key in UPGRADE

Go into the installation summary and print off the details

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
A screenshot from a capture when it was in working condition which software should I install to solve the keycodes issue..should I match and enter all pkg and license information for the keycodes Validation?

RE: Unable to invoke software installation

Have you got the official Nortel keycode sheet?.

If you haven't, then I'm guessing that you are only referring to screen shots from when it was working?. If so, then you will need a fair bit of details such as packages used and any AUX ID etc.

The details for the packages were already explained in LD 143 under UPGRADE.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
Thanks Firebird..everything has done OK..The software is installed...
Just changed selection of FEATURE SET during software installation..

Thanks

RE: Unable to invoke software installation

Great news. We're you able to recover the customers database?

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

RE: Unable to invoke software installation

(OP)
Didn't tried that becauseI don't have any idea how to do that..I have a backed up file xbk format in my pc,, I don't know how to restore that or customer database from that..

RE: Unable to invoke software installation

It was in the restore guide I had sent you.
As long as you kept the original SSC, then the backup database would have remained on it that is called the "Z" drive.

Once the software has been successfully loaded back in, you just need to go into LD 43 and key in DAT to view the 3 databases and hopefully would be seen the bottom one that's on the "Z" drive.

Just key in RES to do the restore and reboot the system to activate the customers database.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = http://somertel.net
linkedin

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close