×
INTELLIGENT WORK FORUMS
FOR COMPUTER PROFESSIONALS

Contact US

Log In

Come Join Us!

Are you a
Computer / IT professional?
Join Tek-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!

*Tek-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Media Server region resource availability

Media Server region resource availability

Media Server region resource availability

(OP)
Hello everyone,

I am experiencing some unusual behavior with my Media Servers, where I've 8 MS in region 1 and 2 and one MS in region 5, this region is not connected to any other region (with no codec set in the IP-network region). I am using a SIP trunk that is configured in the CM and connected to the SIPP application. Whenever the SIPP calls a VDN into the CM via the SIP trunk, this strange behavior occurs, the vector called by the vdn is programmed to call an announcement located in all the Media Server but for a reason that I cannot understand, the CM try to use always a MS in the isolated region, so the application fails.
The signaling's trunk is in NR 1, and the IP of the Sipp application is mapped on NR 1, also the location of MS is 1 but it use always MS in location 3 and NR 5.

What I can check to resolve this issue?
Thanks
Frank

RE: Media Server region resource availability

It sounds like you aren’t using domain based routing so that is why you are seeing that behavior with the media servers

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Tek-Tips Forums free from inappropriate posts.
The Tek-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Tek-Tips forums is a member-only feature.

Click Here to join Tek-Tips and talk with other members! Already a Member? Login


Close Box

Join Tek-Tips® Today!

Join your peers on the Internet's largest technical computer professional community.
It's easy to join and it's free.

Here's Why Members Love Tek-Tips Forums:

Register now while it's still free!

Already a member? Close this window and log in.

Join Us             Close